C/ Almazara 11
Tres Cantos-Madrid(SPAIN)
Tel. +34 91-803-77-11
roberto@aviasport.com
Inicio / Instrumentación / Instruments / EGT / IM-795 /
  Síguenos en

IM-795

Español  

DUAL EGT FOR ROTAX 914
57mm Diameter - ºF

  • The IM-795 instruments have been designed especially to measure the EGT in Rotax® engines 914.
     

  • The IM-795 is available in 57 mm diameter

  • Can be connected two probes. First shows the temperature of one. After of 3 seconds automatically show the other probe temperature, The two LEDs are used to show that probe is reading.
     

  • The instruments use a pointer thats turns 240º, witch gives them great resolution.
     

  • Their display areas are divided  into red, green and yellow zones in line with the ROTAX limits.
     

  • Thanks to embedded operational amplifiers, this
     instrument has a high accuracy, but needs a power
     supply of 12V or 24V.

 
Technical data
Case Plastic
Weight 200g
Suitable for Rotax 914 With Type "K" sender
Power Supply 10..30VDC
Power Current  0.1 Amp. Max.
Scale 600..1800 ºF
Subdivision scale 10ºF
Max. Deviation 1%
Dimensions See sketch
Calibration Calibrated by the manufacturer prior to shipment.
Wire Connections

Dimensions
 
 
IM-795
Part Number:IM-795
Price = 79.00€ + VAT
We sell instruments in the whole
We sell instruments in the whole world.
To calculate the shipping expenses and VAT,
please send an email indicating your country at
roberto@aviasport.com
Soon we will answer the total quantity.
Senders
IM-927
Probe type "K". Has a M8 thread and can be installed directly on the M8 nuts that come from the factory on 914 engines and some 912. In the exhaust without nuts, your need weld 4xM8 nuts. Stainless steel protection. Wire length 2 meters.
Price : 36.46€ + VAT
IM-928
Probe type "K". Has a M8 thread and can be installed directly on the M8 nuts that come from the factory on 914 engines and some 912. In the exhaust without nuts, your need weld 4xM8 nuts. Stainless steel protection. Wire length 3 meters.
Price : 40.70€ + VAT
IM-929
Probe type "K" with Clamp. Designed for 447/503/582 Rotax engines. No need weld nut, simply drill and tighten the clamp. Stainless steel protection. Wire length 2 meters
Price : 35.19€ + VAT

AVIASPORT S.A.
C/ Almazara 11
Tres Cantos (Madrid-SPAIN)
Tel. +34 91-803-77-11
roberto@aviasport.com