C/ Almazara 11
Tres Cantos-Madrid(SPAIN)
Tel. +34 91-803-77-11
roberto@aviasport.com
Inicio / Instrumentación / Instruments / EGT / IM-783 /
  Síguenos en

IM-783

Español  

DUAL EGT FOR ROTAX 582
57mm Diameter - ºF

  • The IM-783 instruments have been designed especially to measure the EGT in Rotax® engines 582.
     

  • The IM-783 is available in 57 mm diameter

  • Can be connected two probes. First shows the temperature of one. After of 3 seconds automatically show the other probe temperature, The two LEDs are used to show that probe is reading.
     

  • The instruments use a pointer thats turns 240º, witch gives them great resolution.
     

  • Their display areas are divided  into red, green and yellow zones in line with the ROTAX limits.
     

  • Thanks to embedded operational amplifiers, this
     instrument has a high accuracy, but needs a power
     supply of 12V or 24V.

 
Technical data
Case Plastic
Weight 200g
Suitable for Rotax 582 With Type "K" sender
Power Supply 10..30VDC
Power Current  0.1 Amp. Max.
Scale 1500..1300 ºF
Subdivision scale 10ºF
Max. Deviation 1%
Dimensions See sketch
Calibration Calibrated by the manufacturer prior to shipment.
Wire Connections

Dimensions

Datasheet   

Senders

IM-919 - Has a M8 thread and can be installed directly on the M8 nuts that come from the factory on 914 engines and some 912. In the exhaust without nuts, your need weld 4xM8 nuts. Stainless steel protection.  Wire length 2 meters.

IM-920 - Has a M8 thread and can be installed directly on the M8 nuts that come from the factory on 914 engines and some 912. In the exhaust without nuts, your need weld 4xM8 nuts. Stainless steel protection.  Wire length 3 meters.

M-924 -Probe type "K" Clamp type. Designed for 447/503/582 Rotax engines. No need weld nut, simply drill and tighten the clamp. Stainless steel protection. Wire length 2 meters.

 

IM-783
Part Number:IM-783
Please contact us for price
Senders
IM-927
Probe type "K". Has a M8 thread and can be installed directly on the M8 nuts that come from the factory on 914 engines and some 912. In the exhaust without nuts, your need weld 4xM8 nuts. Stainless steel protection. Wire length 2 meters.
Price : 36.46€ + VAT
IM-928
Probe type "K". Has a M8 thread and can be installed directly on the M8 nuts that come from the factory on 914 engines and some 912. In the exhaust without nuts, your need weld 4xM8 nuts. Stainless steel protection. Wire length 3 meters.
Price : 40.70€ + VAT
IM-929
Probe type "K" with Clamp. Designed for 447/503/582 Rotax engines. No need weld nut, simply drill and tighten the clamp. Stainless steel protection. Wire length 2 meters
Price : 35.19€ + VAT

AVIASPORT S.A.
C/ Almazara 11
Tres Cantos (Madrid-SPAIN)
Tel. +34 91-803-77-11
roberto@aviasport.com