|
|
|
ROTOR
TACHOMETER
57mm Diameter |
-
The IM-130 instruments have
been designed especially to
measure the Rotor RPM.
-
The IM-130 is available in 57 mm diameter.
-
The instruments have been designed to work with both
12V and 24V systems.
|
 |
|
| Case |
Plastic |
| Weight |
220g |
| Suitable for |
for both hall and inductive PNP
type sensors |
| Power Supply |
10..35VDC |
| Power
Current |
0.1 Amp. Max. |
| Scale |
0..500 rpm |
| Subdivision
scale |
10 rpm each |
| Max.
Deviation |
1% |
| Dimensions |
See sketch |
| Calibration |
Calibrated by the manufacturer
prior to shipment. |
|
|
|
 |
|
|
-
The IM-424 is inductive sensor that is activated when a
piece of iron passes near, without touching
them.
Only works with alloys high in iron.
-
The
sensor can work in two ways, with cam
(Figure 1) or slot (Figure 2). In both cases
the number of cams or slots have to be four.
-
The
sensor has a LED on the back, for easy
adjustment.
-
The
setting is very simple and consists of
tightening or loosening the two nuts sensor,
towards or away from the cam sensor until
the LED comes on when the cam pass and shut
itself off when the cam has passed.
|
 |
|
|
|
 |
|
|